Click image to view full size image
HR80/HR260 High Pressure-Temperature Steam Trap
Brief Introduction.
This type of steam trap is made of alloy steel,can be used for high pressure and temperature working conditions where the medium can be the medium can be saturated steam and over heated steam,besides,It has following advantages:
1.The steam jacket is not affected by pressure changing,no air play happening.
2.Air vent device can start up very quickly at the beginning of steam supply.
3.Built-in large area filter screen ensure normal operating.
4.Easy maintenance,long service life.
5.Can be installed in any angle.
Field of Application.
Product Name: HR80/HR260 High Pressure-Temperature Steam Trap.
Pressure Rating: 10.0/26.0 Mpa.
Nominal Diameter: DN15-25mm.
Body Material: F22.
Standard Screws: BSP,NPT.
Standard Welds:SW.
Main Technical Parameters and Indexes of Performance.
Material of Main Component.
Main External Dimensions.
Brief Introduction.
This type of steam trap is made of alloy steel,can be used for high pressure and temperature working conditions where the medium can be the medium can be saturated steam and over heated steam,besides,It has following advantages:
1.The steam jacket is not affected by pressure changing,no air play happening.
2.Air vent device can start up very quickly at the beginning of steam supply.
3.Built-in large area filter screen ensure normal operating.
4.Easy maintenance,long service life.
5.Can be installed in any angle.
Field of Application.
Product Name: HR80/HR260 High Pressure-Temperature Steam Trap.
Pressure Rating: 10.0/26.0 Mpa.
Nominal Diameter: DN15-25mm.
Body Material: F22.
Standard Screws: BSP,NPT.
Standard Welds:SW.
Main Technical Parameters and Indexes of Performance.
| Max.Operating Temperature | 550 |
| Min.Operating Pressure(Mpa) | 0.8 |
| Max.Operating Pressure(Mpa) | 26.0 |
| Max.Discharge Capacity(kg/h) | 225 |
Material of Main Component.
| Name of component | Material of component |
| Body | F22 |
| Cap | F22 |
| Seat | 304/STL |
| Disc | 9Cr18 |
| Screen | 304 |
Main External Dimensions.
|
| Model | DN | L | H | h |
| HR80W | 15 | 110 | 115 | 20 |
| 20 | 110 | 115 | 20 | |
| 25 | 110 | 115 | 20 | |
| HR260W | 15 | 140 | 145 | 28 |
| 20 | 140 | 145 | 28 | |
| 25 | 140 | 145 | 28 |